|
Xbox 360 Ring
of Light / ROL Mods Information
Written by John Moorhead aka Dr. Console
Since the introduction of the Xbox 360 console, people have been
tinkering with the looks and asthetics to give it a touch of personalization
and make it their own. One of the most popular Xbox 360 mods to
perform is the Ring of Light or ROL mod which changes the color
of the ring of light on the front of your console to a color of
your choice. This adds a finishing touch to any case mod you might
perform, or can be done on its own, and is very easy to do. The
cool thing about it is you always see at least 1 LED of the ring
of light when you are using your console and on boot up it cycles
around the ring several times, this is really cool to see and will
make your friends green with envy!
Installation: The ring of light board plugs into the front of
your console underneath the faceplate and just inside the front
snaps of the console case, you don't even need to fully open the
console to perform this kind modification. We have outsourced a
number of premodded Ring of Light / ROL boards to make this even
easier for you to install. You simply unplug your old one after
remove 3 small screws and plug in the new one. Viola! You are done,
just snap the front of your console back together and replace the
faceplate to complete the installation.
Extreme-Mods has obtained several different colors of Xbox 360
Ring of Light / ROL mods for you to choose from. These colors are
listed below:
   
  
|
Before:
|
After:
|
|
